Prusa SL1 3D Printer Settings

You can use Opague, Dark, Zero and Wax DLP resins with Prusa SL1 3D Printer. Find below printing settings at 50 micron for this resins;

Please note that these settings are provided by customers who are using our resins with Pruse SL1 3D printers so that may cause discrepancies.

Thick Model Settings;

Opaque Resin
Exposure 15 seconds
Initial Exposure 100 seconds
Layer Height  0.05 mm
Dark Resin
Exposure 20 seconds
Initial Exposure 100 seconds
Layer Height  0.05 mm
Zero Resin
Exposure 20 seconds
Initial Exposure 100 seconds
Layer Height  0.05 mm
Wax Resin
Exposure 15 seconds
Initial Exposure 100 seconds
Layer Height  0.05 mm

 

Thin Model Settings;

Opaque Resin
Exposure 18 seconds
Initial Exposure 100 seconds
Layer Height  0.05 mm
Dark Resin
Exposure 23 seconds
Initial Exposure 100 seconds
Layer Height  0.05 mm
Zero Resin
Exposure 23 seconds
Initial Exposure 100 seconds
Layer Height  0.05 mm
Wax Resin
Exposure 18seconds
Initial Exposure 100 seconds
Layer Height  0.05 mm