Skip to product information
1 of 1

powerresins

SG

SG

Regular price $240.00 USD
Regular price Sale price $240.00 USD
Sale Sold out
Weight
Autoclavable, Rigid Surgical Guide Resin

PowerResins SG resin is a transparent CE certified Class Ia biocompatible, autoclavable with standart protocols, clear and rigid surgical guide resin perfectly formulated for guided implant surgeries. 3D printing with exceptional mechanical properties provides you the best full arch multi unit implant guides cost effectively. Easy to insert drill sleeves directly after printing. Perfectly can be used as gingivectomy guides and bone reduction guides.


  • High flexural strength and modulus guided surgeries
  • Transparent, odorless and tasteless
  • Can be sterilized via autoclave at 121-125 degrees celsius
  • Produced under ISO standarts 13485:2016
  • Find here validated 3D printers list
View full details

Product Description

Product Features

  • High flexural strength and modulus guided surgeries
  • Transparent, odorless and tasteless
  • Can be sterilized via autoclave at 121-125 degrees celsius
  • Produced under ISO standarts 13485:2016
  • Find here(link to KB printing parameters) validated 3D printers list

Material Properties

Material PropertiesValueStandard
Tensile strength41.1 MpaASTM D638
Flexural strength104.2 MpaASTM D790-02
Flexural modulus2800 MpaASTM D790-02
Density1.1 g/cm3 at 23 CASTM D1475
Shore Hardness83.6 DASTM D2240
Viscosity520-540 mPa.s at 23 CDIN 53211-4
ColorTranslucent White

Post Process

1- Washing

After the printing is completed, wash the part as attached to the building plate with ethyl alcohol (>%90) or isopropyl alcohol (>%90) for 5 minutes. Make sure that alcohol covers the part entirely when washing. Since the Surgical Guide resin is biocompatible never wash it with the alcohol used for other resins before. Use a brush to remove uncured resin if needed. Do not over-wash, it may cause deterioration in dimensions of the part.

2- Drying

Use air-compressor to dry the washed part. Make sure that the part is dry and uncured resin is cleaned up completely. If there is still uncured resin left on the part, wash it with fresh alcohol and dry again.

3- Part Removal

Remove the printed part from the build plate using a scraping tool. Be very careful not to damage the model.

4- Post Curing

Supports should be removed from the model cautiously and insert drills before curing. 20 minutes with MEDIFIVE curing chamber at 3rd-degree light intensity Otoflash curing recommendations 104 MPa flexural strength with 5000 flashes without gas.

Storage Conditions

Store the PowerResins Temp bottle in dark and moisture free place at room temperature (20-24 °C).

Do not forget shaking the resin well before use.

If your printer has heater, you can set the temperature at 32 °C. Otherwise, you can heat your resin in a microwave for 18 seconds or by submerging in hot water for 15-20 minutes.

  • BIOCOMPATIBLE

    Biocompatibe and safe to use in mouth. Produced from biocompatible raw material used in dental applications

  • PRECISION DRILLING

    It has been specially developed for performing precise surgical implant procedures

  • PRESSURE RESISTANT

    Resist to high pressure, suitable for surgical implant guide

  • SAFE & NO TASTE

    Safe to handle. Does not contain any hazardous solvent or dangerous monomer.