BURN Jewelry Casting Resin

$160.00
  • BURN Jewelry Casting Resin

BURN Jewelry Casting Resin

$160.00
$160.00
1

Works with any type of DLP or LED/LCD 3d printer

PowerResins Burn is a special 100% ash-free castable resin that is formulated for perfect quality in direct casting.

  • 100% ash-free burnout for direct casting.
  • Suitable for Jewelry and Dental casting.
  • Can be used for any type of jewelry including heavy, European jewelry or filigree designs.
  • Perfect casting quality so need of minimum polishing after casting
  • Use of standard burnout cycle.
  • Suitable for 365nm / 385nm and 405nm wavelenght 3D printers

This special resin can be used for any type of DLP or LED curing 3d printer. It has fast curing properties depending on the 3d printer used.

We ship everyday worldwide via DHL and it takes up to 1-3 business days to reach you!

100% ASH-FREE CASTABLE

Specially made for direct casting. Evaporates with heat leaving no ash.

EASY TO CAST

Easy to cast with investments such as Sherafine, Polyvest, Siladent, Bego, Nanovest or others

SAFE & NOT SMELLY

Safe to handle. Does not contain any hazardous solvent or dangerous monomer.

LIQUID

This resin has low viscosiy. It is easy to clean and provides high yiled after cleaning.

NO NEED UV POST-CURING

No need for Post-UV curing after printing. Simply wash and use.

ACCURATE

Provide accurate print with details and can be printed below 10 micron and providing 0.1 mm thickness.

COMPATIBLE WITH 365,385 and 405 nm

You can use this resin with any printer that has 365-385nm or 405nm light source



Burn Resin Print Samples

Burn Resin Material Properties

Material PropertiesValueStandard
Tensile strength 39.7 MPaASTM D638
Flexural strength 56 MPaASTM D790-02
Flexural modulus1417 MPaASTM D790-02
Shore Hardness 78.2 ASTM D2240
Density1.1 g/cm3 at 23oCASTM D1475
Viscosity550 - 570 mPa.s at 23oCDIN 53211-4
ColorOpaque Green

Post Process of PowerResins Burn

1- Washing

- After the printing is completed, wash the part as attached to the building plate with ethyl alcohol (>%90) or isopropyl alcohol (>%90) for 5 minutes.
- Make sure that alcohol covers the part entirely when washing.
- Use a brush to remove uncured resin if needed.
- Do not over-wash, it may cause deterioration in dimensions of the part.

2- Drying

- Use air-compressor to dry the washed part.
- Make sure that the part is dry and uncured resin is cleaned up completely.
- If still uncured resin left on the part, wash it with fresh alcohol and dry again.

3- Part Removal

- Remove the printed part from the building plate using a scraping tool. Be very careful not to damage your hand and the model.
- Store the PowerResins Burn bottle in dark and moisture free place at room temperature (20-24 °C).

Always wear gloves during the post process !

Do you have a Sticking Problem on your Build platform?

Solution :

Primer Resin Strong Adhesion

PowerResins Primer, is a resin that has very strong adhesion properties and designed to use for any LCD, DLP and SLA technology printers who has adhesion issues with.

Learn More

Perfect Casting Results

Compatible DLP 3D Printers

  • Novafab Mega / Sega
  • Asiga
  • RapidShape
  • Miicraft
  • EnvisionTec
  • Projet 1200
  • B9 Creator
  • Flashforge Hunter
  • Akuretta
  • 3D Plus
  • OctaveLight / Orojet
  • W2P
  • RapidShape
  • SprintRay / MoonRay
  • Tiger
  • Carbon3D
  • NextDent / 3D Systems
  • Evodent
  • Microlay
  • G3D

Compatible DLP 3D Printers

  • Novafab Mega
  • Asiga
  • RapidShape
  • Miicraft
  • EnvisionTec
  • Projet 1200
  • B9 Creator
  • Flashforge Hunter
  • Akuretta
  • 3D Plus
  • OctaveLight / Orojet
  • W2P
  • RapidShape
  • SprintRay / MoonRay
  • Tiger
  • Carbon3D
  • NextDent / 3D Systems
  • Evodent
  • Microlay
  • G3D