Skip to product information
1 of 1

powerresins

BURN2

BURN2

Regular price $260.00 USD
Regular price Sale price $260.00 USD
Sale Sold out
Weight
%100 Ash-Free Rapid Burnout Castable Resin

PowerResins BURN 2 resin is reformulated as %100 ash-free castable resin for excellent quality speed burnout for dental direct metal partial frameworks, chrome-cobalt casting as well as excellent for lithium disilicate press applications for inlay, onlay and overlay, laminate and veneer models. You will not face with any investment cracks or expansion during your casting process and can be used with any dental investment/gypsoms brand.

  • 100% ash-free burnout for dental fast burnout chrome cobalt casting
  • No investment cracks or expansion
  • Lithium disilicate inlay, onlay, overlay, laminate and veneer models
  • Produced under ISO standarts 13485:2016
  • Find here validated DLP, LCD 3D printers list
    View full details

    Product Description

    Product Features

    • 100% ash-free burnout for dental fast burnout chrome cobalt casting
    • No investment cracks or expansion
    • Lithium disilicate inlay, onlay, overlay, laminate and veneer models
    • Produced under ISO standarts 13485:2016
    • Find here(link to KB printing parameters) validated DLP, LCD 3D printers list

    Material Properties

    Material PropertiesValueStandard
    Flexural strength20.7 MpaASTM D790-02
    Flexural modulus472 MpaASTM D790-02
    Tensile Strength14.4 MpaASTM D638
    Density1.08 g/cm3 at 23 CASTM D1475
    Shore Hardness70.5 DASTM D2240
    Viscosity490 - 510 mPa.s at 23 CDIN 53211-4
    ColorGreen

    Post Process

    1- Washing

    After the printing is completed, wash the part as attached to the building plate with ethyl alcohol (>%90) or isopropyl alcohol (>%90) for 5 minutes. Make sure that alcohol covers the part entirely when washing. Do not over-wash, it may cause deterioration in dimensions of the part.

    2- Drying

    Use air-compressor to dry the washed part. Make sure that the part is dry and uncured resin is cleaned up completely. If still uncured resin left on the part, wash it with fresh alcohol and dry again. 3- Part Removal

    Remove the printed part from the building plate using a scraping tool. Be very careful not to damage your hand and the model.

    4- No need post UV curing! Enjoy your casting.

    Storage Conditions

    Store the PowerResins Temp bottle in dark and moisture free place at room temperature (20-24 °C).

    Do not forget shaking the resin well before use.

    If your printer has heater, you can set the temperature at 32 °C. Otherwise, you can heat your resin in a microwave for 18 seconds or by submerging in hot water for 15-20 minutes.

    • 100% ASH-FREE CASTABLE

      Specially made for direct casting. Evaporates with heat leaving no ash.

    • NO NEED POST CURING

      After printing wash and dry yet it is ready to proceed rapid dental casting.

    • E-MAX PRESS APPLICATIONS

      Empress Lithium disilicate inlay, onlay, overlay, laminate and veneer models.

    • PERFECT FITTING

      High accuracy and perfect fitting margin lines for your castable applications