Resins for B9 Creator 3D Printer

You can use any DLP resins with B9 Creator 3D Printers. B9 Creator is a DLP 3d printer and it is easy to adapt the profiles for our resins.

We provide here the profile used by some of our customers for Burn DLP resin, however you can adjust these parameters according to the type of print you are making or the Z layer thickness you wish to use.

Powerresins DLP resins are compatible with B9 Core 3D printers.

B9 Core 530

B9 Core 550

B9 Core 5 Series XL

Castable resins For B9 Core 3D printers

PowerResins Burn

Order Now

PowerResins Wax

Order Now

PowerResins Dark

Order Now

High precision and Smooth surface with PowerCast resins

With all B9 Core 3D Printers, you can use PowerCast Burn, Wax or Dark resins. We recommend Burn for most of the jewelry prints but you may prefer PowerCast Wax resin for surface or heavier jewelry as it provides smooth surface prints.
Important Note: you don't need any UV post-curing with our castable resins.

PowerCast Resin Cast Samples

Please note that all the pictures are the raw casting of 14k gold, 21k gold, and silver without any polish made after the casting. The burnout cycle used in these examples are normal burnout cycle with various investments such as Omnicast, Optima or Plasticast without using any special treatment or post-curing after the printing.

Burn resin for B9 Creator

Name  Fire
DescriptionHi-Res, castable
Minimum Slice Thickness 25.0 um
Maximum Slice Thickness 70.0 um
Exposure Factor 7.4
DOC Rate Factor 0.22
UV Sensitivity Factor 0.15
Over Cure Multiplier 0.10
Attach Multiplier 2.30
Attach Layers 2
Shrinkage Multiplier 1.0