Resins for Elegoo 3D Printers

You can use PowerResins resins with all Elegoo 3D Printers such as the Elegoo Mars and the Elegoo Saturn. Please find below the recommended castable resins for jewelry casting. Beside jewelry castable resins, you may also use our dental resins with Elegoo 3d printers.

PowerResins resins are compatible with all Elegoo LCD 3D printers.

Elegoo Mars

Elegoo Saturn

Jewelry Castable resins for Elegoo Mars

PowerResins Burn

Order Now

PowerResins Wax

Order Now

PowerResins Dark

Order Now

High precision and Smooth Surface with PowerCast resins

With all Elegoo 3D Printers, you can use PowerCast Burn, Wax or Dark resins. We recommend Burn for most of the jewelry prints but you may prefer PowerCast Wax resin for surface or heavier jewelry as it provides smooth surface prints. 
Important Note: you don't need any UV post-curing with our castable resins.

PowerCast Resin Cast Samples

Please note that all the pictures are the raw casting of 14k gold, 21k gold, and silver without any polish made after the casting. The burnout cycle used in these examples are normal burnout cycle with various investments such as Omnicast, Optima or Plasticast without using any special treatment or post-curing after the printing.

Elegoo Mars Settings for 50 micron with Dark resin

Below we share the settings that our customers are using for 50 micron with Dark castable resin.

 Layer Height :  0.05
Bottom Count : 25
Exposure Time :  21 s
Bottom Exposure : 130 s
Light Off :  0 s
Bottom Light Off : 0 s

Elegoo Mars Settings for 50 micron with Burn resin

Below we share the settings that our customers are using for 50 micron with Burn castable resin.

 Layer Height :  0.05
Bottom Count : 8
Exposure Time :  14 s
Bottom Exposure : 80 s
Light Off :  0 s
Bottom Light Off : 0 s

You may adjust the Z layers height depending on your need. As a typical rule of thumb, if you decrease the Z layer height, we would decrease the Exposure time, while if you increase the Z layer height, you would increase the exposure time.