Resins for Prusa SL1 3D Printer and Settings
You can use Opague, Dark, Zero and Wax DLP resins with Prusa SL1 3D Printer. Find below printing settings at 50 micron for this resins;
PowerResins are compatible with Prusa SL1 3D printer.
Prusa SL1
Resin Settings for Prusa SL1 3D Printer
Prusa SL1
Below we share with you some of the parameters you need to setup when you want to print with Powerresins, Opaque, Dark, Zero, Wax
Please note that these settings are provided by customers who are using our resins with Pruse SL1 3D printers so that may cause discrepancies.
Layer Height : 50 Micron
| Thick Model Settings | Opaque | Dark | Zero | Wax |
|---|---|---|---|---|
| Exposure | 15 s | 20 s | 20 s | 15 s |
| Initial Exposure | 100 s | 100 s | 100 s | 100 s |
| Layer Height | 0.05 mm | 0.05 mm | 0.05 mm | 0.05 mm |
| Thin Model Settings | ||||
| Exposure | 18 s | 23 s | 23 s | 18 s |
| Initial Exposure | 100 s | 100 s | 100 s | 100 s |
| Layer Height | 0.05 mm | 0.05 mm | 0.05 mm | 0.05 mm |
Do you have a Sticking Problem on your Build platform?
Solution :
Primer Resin Strong Adhesion
PowerResins Primer, is a resin that has very strong adhesion properties and designed to use for any LCD, DLP and SLA technology printers who has adhesion issues with.
Learn MorePowerResins Gold and Silver Casting
Our castable resins are ash-free resins and very easy to cast. You can use most investment powders such as Optima Prestige, GolStar or Omnicast for gold or silver casting. You may use your own standard burnout like if you were casting wax or try our recommended burnouts. Below you can see some raw unpolished casting of gold (14k, 18k, 21k) or silver.
