Works with any type of DLP or LED/LCD 3d printer
PowerResins Opaque is a special 100% ash-free castable resin that is formulated for DLP 3d printers in order to get perfect printing and direct casting quality in jewelry manufacturing. It has an opaque colour and provides perfect detail and surface quality in printing and casting.
Properties of Opaque:
- Perfect surface and print quality for DLP 3d printers
- 100% ash-free burnout for direct casting of jewelry. You may easily cast 21k, 18k, 14k gold or silver
- Can be used for any type of jewelry including engraving, smooth surface, high details or filigree jewelry.
- No need for post-curing: Only wash with ethyl alcohol and dry with air then it is ready for casting.
- Use of standard burnout cycle, no need for special treatment
- Not smelly or dangerous for health
- Suitable for 365nm / 385nm and 405nm wavelenght 3D printers
This special resin can be used for any type of DLP projector 3d printer. You may check the settings of our PowerCast Burn resin under our settings section and use the same.
We ship everyday worldwide via DHL and it takes up to 1-3 business days to reach you!
100% ASH-FREE CASTABLE
Specially made for direct casting. Evaporates with heat leaving no ash.
EASY TO CAST
Easy to cast with investments such as Sherafine, Polyvest, Siladent, Bego, Nanovest or others
SAFE & NOT SMELLY
Safe to handle. Does not contain any hazardous solvent or dangerous monomer.
LIQUID
This resin has low viscosiy. It is easy to clean and provides high yiled after cleaning.
NO NEED UV POST-CURING
No need for Post-UV curing after printing. Simply wash and use.
ACCURATE
Provide accurate print with details and can be printed below 10 micron and providing 0.1 mm thickness.
COMPATIBLE WITH 365,385 and 405 nm
You can use this resin with any printer that has 365-385nm or 405nm light source
Opaque Resin Print and Cast Samples
Please note that all the pictures are the raw casting of 14k gold, 21k gold, and silver without any polish made after the casting. The burnout cycle used in these examples are normal burnout cycle with various investments such as Omnicast, Optima or Plasticast without using any special treatment or post-curing after the printing.
Opaque Resin Material Properties
| Material Properties | Value | Standard |
|---|---|---|
| Tensile strength | 9.63 MPa | ASTM D638 |
| Flexural strength | 11.43 MPa | ASTM D790-02 |
| Flexural modulus | 258.6 MPa | ASTM D790-02 |
| Shore Hardness | 60.8 | ASTM D2240 |
| Density | 1.08 g/cm3 at 23oC | ASTM D1475 |
| Viscosity | 480 - 500 mPa.s at 23oC | DIN 53211-4 |
| Color | Opaque Green |
Post Process of PowerResins Opaque
1- Washing
- After the printing is completed, wash the part as attached to the building plate with ethyl alcohol (>%90) or isopropyl alcohol (>%90) for 5 minutes.
- Make sure that alcohol covers the part entirely when washing.
- Use a brush to remove uncured resin if needed.
- Do not over-wash, it may cause deterioration in dimensions of the part.
2- Drying
- Use air-compressor to dry the washed part.
- Make sure that the part is dry and uncured resin is cleaned up completely.
- If still uncured resin left on the part, wash it with fresh alcohol and dry again.
3- Part Removal
- Remove the printed part from the building plate using a scraping tool. Be very careful not to damage your hand and the model.
- Store the PowerResins Opaque bottle in dark and moisture free place at room temperature (20-24 °C).
Always wear gloves during the post process !
Do you have a Sticking Problem on your Build platform?
Solution :
Primer Resin Strong Adhesion
PowerResins Primer, is a resin that has very strong adhesion properties and designed to use for any LCD, DLP and SLA technology printers who has adhesion issues with.
Learn MoreCompatible 3D Printers
DLP 3D Printers
LCD 3D Printers
- Novafab Mega / Sega
- Asiga
- RapidShape
- Miicraft
- EnvisionTec
- Projet 1200
- B9 Creator
- Flashforge Hunter
- Akuretta
- 3D Plus
- OctaveLight / Orojet
- W2P
- RapidShape
- SprintRay / MoonRay
- Tiger
- Carbon3D
- NextDent / 3D Systems
- Evodent
- Microlay
- G3D
- AnyCubic
- Wanhao
- RapidShape
- Uniz Slash
- Phrozen
- Zortrax Inkspire
- MakeX
- Structo3D DentaForm
- Elegoo Mars
- Prusa SL1
- Kudo Bean
- Ackuretta Freeshape
Compatible 3D Printers
DLP 3D Printers
- Novafab Mega
- Asiga
- RapidShape
- Miicraft
- EnvisionTec
- Projet 1200
- B9 Creator
- Flashforge Hunter
- Akuretta
- 3D Plus
- OctaveLight / Orojet
- W2P
- RapidShape
- SprintRay / MoonRay
- Tiger
- Carbon3D
- NextDent / 3D Systems
- Evodent
- Microlay
- G3D
LCD 3D Printers
- AnyCubic
- Wanhao
- RapidShape
- Novafab Vega
- Uniz Slash
- Phrozen
- Zortrax Inkspire
- MakeX
- Structo3D DentaForm
- Elegoo Mars
- Prusa SL1
- Kudo Bean
- Ackuretta Freeshape