DARK Sharp Castable Resin

$300.00
  • DARK Sharp Castable Resin

DARK Sharp Castable Resin

$300.00
$300.00

Works with any type of DLP or LED/LCD 3d printer

PowerResins Dark has been developed specifically for direct casting of jewelry with high details. It provides perfect casting quality combined with very sharp printing abilities and easy to set stones. 

  • Very high precision and accuracy
  • Perfect printing properties with sharp details suitable for jewelry with micro-pave prongs, engraving, highly detailed figures or filigree
  • Easy to set stones directly on printed model before casting
  • Create lighter jewelry with perfect precision
  • Perfect 100% ash-free burnout for direct casting
  • Use of standard wax burnout cycle
  • No need for post-curing after printing
  • Suitable for 365nm / 385nm and 405nm wavelenght 3D printers

This special resin can be used for any type of DLP or LED curing 3d printer. It has fast curing properties depending on the 3d printer used.

  • Fast curing properties for fast printing
  • Very accurate printing properties also suitable for Solus 3d printer

*You may buy 250 g as a sample resin please check the weight section.

We ship everyday worldwide via DHL and it takes up to 1-3 business days to reach you!

SHARP DETAILS

Perfect printing properties with sharp details suitable for jewelry with micro-pave prongs, engraving, highly detailed figures 

100% ASH-FREE CASTABLE

Specially made for direct casting. Evaporates with heat leaving no ash.

EASY TO SET STONES

Easy to set stones directly on printed model before casting

EASY TO CAST

Easy to cast with most investments such as Omnicast, Certus Optima, Kerr or others

SAFE & NOT SMELLY

Safe to handle. Does not contain any hazardous solvent or dangerous monomer

ACCURATE

Provide accurate print with details and can be printed below 10 micron and providing 0.1 mm thickness

LIQUID

This resin has low viscosiy. It is easy to clean and provides high yiled after cleaning

COMPATIBLE WITH 365,385 and 405 nm

You can use this resin with any printer that has 365-385nm or 405nm light source

Dark Resin Print and Cast Samples

Jewelry manufacturers use direct casting in order to produce high end jewelry. PowerCast Dark is our newly developed resin to get the perfect detailed print and the best quality casting. It is suitable for direct casting highly precise jewelry as well as very light jewelry

Dark Resin Material Properties

Material PropertiesValueStandard
Tensile strength 10 MPaASTM D638
Flexural strength 12.8 MPaASTM D790-02
Flexural modulus281.3 MPaASTM D790-02
Density1.07 g/cm3 at 23oCASTM D1475
Viscosity550 - 580 mPa.s at 23oCDIN 53211-4
ColorBlack

Post Process of PowerResins Dark

1- Washing

- After the printing is completed, wash the part as attached to the building plate with ethyl alcohol (>%90) or isopropyl alcohol (>%90) for 5 minutes.
- Make sure that alcohol covers the part entirely when washing. 
- Use a brush to remove uncured resin if needed.
- Do not over-wash, it may cause deterioration in dimensions of the part.

2- Drying

- Use air-compressor to dry the washed part.
- Make sure that the part is dry and uncured resin is cleaned up completely.
- If still uncured resin left on the part, wash it with fresh alcohol and dry again.

3- Part Removal

- Remove the printed part from the building plate using a scraping tool.Be very careful not to damage your hand and the model.
- Store the PowerResins Dark bottle in dark and moisture free place at room temperature (20-24 °C).

Always wear gloves during the post process !

Do you have a Sticking Problem on your Build platform?

Solution :

Primer Resin Strong Adhesion

PowerResins Primer, is a resin that has very strong adhesion properties and designed to use for any LCD, DLP and SLA technology printers who has adhesion issues with.

Learn More

Compatible DLP 3D Printers

  • Novafab Mega / Sega
  • Asiga
  • RapidShape
  • Miicraft
  • EnvisionTec
  • Projet 1200
  • B9 Creator
  • Flashforge Hunter
  • Akuretta
  • 3D Plus
  • OctaveLight / Orojet
  • W2P
  • RapidShape
  • SprintRay / MoonRay
  • Tiger
  • Carbon3D
  • NextDent / 3D Systems
  • Evodent
  • Microlay
  • G3D
  • Solus

Compatible DLP 3D Printers

  • Novafab Mega
  • Asiga
  • RapidShape
  • Miicraft
  • EnvisionTec
  • Projet 1200
  • B9 Creator
  • Flashforge Hunter
  • Akuretta
  • 3D Plus
  • OctaveLight / Orojet
  • W2P
  • RapidShape
  • SprintRay / MoonRay
  • Tiger
  • Carbon3D
  • NextDent / 3D Systems
  • Evodent
  • Microlay
  • G3D
  • Solus