RTV - Resin for Silicone Mould

$200.00
  • RTV - Resin for Silicone Mould

RTV - Resin for Silicone Mould

$200.00
$200.00

Works with any type of DLP or LED/LCD 3d printer

PowerResins RTV resin is a special 3d printer resin that is designed for taking RTV (Room Temperatur Vulcanized) liquid silicone molds.

This special resin enables to have very sharp and accurate details. You may also post-cure this resin and make it harder in order to polish it before taking RTV liquid mold.

  • Easily take liquid RTV mold from printed model
  • Perfect printed quality for details
  • Smooth surface that can be also post-polish or post-cured
  • High dimensional accuracy and no deformation in time

      This special resin can be used for any type of DLP or LED curing 3d printer. It has fast curing properties depending on the 3d printer used.

      • Fast curing properties for fast printing
      • Suitable for 365nm / 385nm and 405nm wavelenght 3D printers

      We ship everyday worldwide via DHL and it takes up to 1-3 business days to reach you!

      EAISLY TAKE RTV MOLD

      Designed for taking RTV (Room Temperatur Vulcanized) liquid silicone molds.

      SAFE & NOT SMELLY

      Safe to handle. Does not contain any hazardous solvent or dangerous monomer

      LIQUID

      This resin has low viscosiy. It is easy to clean and provides high yiled after cleaning

      ACCURATE

      Provide accurate print with details and can be printed below 10 micron and providing 0.1 mm thickness.

      RTV Resin Print Samples

      RTV Resin Material Properties

      Material PropertiesGreen ValuePost Cure ValueStandard
      Tensile strength23.1 MPa 19.3 MPaASTM D638
      Flexural strength59.8 MPa37.09 MPaASTM D790-02
      Flexural modulus2002.9 MPa947.6 MPaASTM D790-02
      Shore Hardness 7880.4ASTM D2240
      Material PropertiesValueStandard
      Density 1.01 g/cm3 at 23oCASTM D1475
      Viscosity500 - 530 mPa.s at 23oCDIN 53211-4
      ColorPink

      Post Process of PowerResins RTV

      1- Washing

      - After the printing is completed, wash the part as attached to the building plate with ethyl alcohol (>%90) or isopropyl alcohol (>%90) for 5 minutes.
      - Make sure that alcohol covers the part entirely when washing. 
      - Use a brush to remove uncured resin if needed.
      - Do not over-wash, it may cause deterioration in dimensions of the part.

      2- Drying

      - Use air-compressor to dry the washed part.
      - Make sure that the part is dry and uncured resin is cleaned up completely.
      - If still uncured resin left on the part, wash it with fresh alcohol and dry again.

      3- Part Removal

      - Remove the printed part from the building plate using a scraping tool.Be very careful not to damage your hand and the model.
      - Store the PowerResins RTV bottle in dark and moisture free place at room temperature (20-24 °C).

      Always wear gloves during the post process !

      Do you have a Sticking Problem on your Build platform?

      Solution :

      Primer Resin Strong Adhesion

      PowerResins Primer, is a resin that has very strong adhesion properties and designed to use for any LCD, DLP and SLA technology printers who has adhesion issues with.

      Learn More

      Compatible 3D Printers

      DLP 3D Printers

      LCD 3D Printers

      • Novafab Mega / Sega
      • Asiga
      • RapidShape
      • Miicraft
      • EnvisionTec
      • Projet 1200
      • B9 Creator
      • Flashforge Hunter
      • Akuretta
      • 3D Plus
      • OctaveLight / Orojet
      • W2P
      • RapidShape
      • SprintRay / MoonRay
      • Tiger
      • Carbon3D
      • NextDent / 3D Systems
      • Evodent
      • Microlay
      • G3D
      • AnyCubic
      • Wanhao
      • RapidShape
      • Uniz Slash
      • Phrozen
      • Zortrax Inkspire
      • MakeX
      • Structo3D DentaForm
      • Elegoo Mars
      • Prusa SL1
      • Kudo Bean
      • Ackuretta Freeshape

      Compatible 3D Printers

      DLP 3D Printers

      • Novafab Mega
      • Asiga
      • RapidShape
      • Miicraft
      • EnvisionTec
      • Projet 1200
      • B9 Creator
      • Flashforge Hunter
      • Akuretta
      • 3D Plus
      • OctaveLight / Orojet
      • W2P
      • RapidShape
      • SprintRay / MoonRay
      • Tiger
      • Carbon3D
      • NextDent / 3D Systems
      • Evodent
      • Microlay
      • G3D

      LCD 3D Printers

      • AnyCubic
      • Wanhao
      • RapidShape
      • Novafab Vega
      • Uniz Slash
      • Phrozen
      • Zortrax Inkspire
      • MakeX
      • Structo3D DentaForm
      • Elegoo Mars
      • Prusa SL1
      • Kudo Bean
      • Ackuretta Freeshape