Skip to product information
1 of 4




Regular price $350.00 USD
Regular price Sale price $350.00 USD
Sale Sold out

PowerResins WAX, designed with the characterictics of traditional wax with enhanced features allowing you to cast it like wax. Ideal for products that require flawless surface smoothness, PowerResins WAX provides the ultimate in jewelry manufacturing. It elevates the quality of your creations with its unrivaled performance in achieving smooth surfaces.

  • Wax-like texture and properties
  • Seamless surface perfection
  • Shrinkage rate is %5
  • Find here printing parameters for DLP and LCD printers
    View full details

    Product Description

    Product Features

    • Shrinkage rate is less than %1
    • Ash-free casting like a wax
    • No need post curing
    • Perfect for stone settings
    • Find here(link to KB printing parameters) printing parameters for DLP and LCD printers

    Material Properties

    Material PropertiesValueStandard
    Tensile strength10.4 MPaASTM D638
    Flexural strength12.2 MPaASTM D790-02
    Flexural modulus277.3 MPaASTM D790-02
    Shore Hardness55.6ASTM D2240
    Density1.08 g/cm3 at 23oCASTM D1475
    Viscosity730 - 760 mPa.s at 23oCDIN 53211-4
    ColorLight Blue

    Post Process

    1- Washing

    After the printing is completed, wash the part as attached to the building plate with ethyl alcohol (>%90) or isopropyl alcohol (>%90) for 5 minutes. Make sure that alcohol covers the part entirely when washing. Do not over-wash, it may cause deterioration in dimensions of the part.

    2- Drying

    Use air-compressor to dry the washed part. Make sure that the part is dry and uncured resin is cleaned up completely. If still uncured resin left on the part, wash it with fresh alcohol and dry again.

    3- Part Removal

    Remove the printed part from the building plate using a scraping tool. Be very careful not to damage your hand and the model.

    4- No need post UV curing! Enjoy your casting.

    Storage Conditions

    Store the PowerResins Wax bottle in dark and moisture free place at room temperature (20-24 °C).

    Do not forget shaking the resin well before use.


      Enjoy smooth surface prints like a traditional wax.


      Easily set stones directly on printed model before casting.


      Easily cast your jewelry models with Optima prestige, Omnicast, Ransom & Randolph.


      After printing simply wash and dry yet ready to be casted.