VACUUM FORMING

High accuracy and pressure resistant for vacuum forming of aligners.

HEAT RESISTANT

Models are stable at high temperatures which is suitble for vacuum thermoforming.

PRESSURE RESISTANT

Resist to high pressure and enables producing aligners with vacuum forming.

ACCURATE

Provide accurate print with details and can be printed below 10 micron and providing 0.1 mm thickness.

LIQUID

This resin has low viscosiy. It is easy to clean and provides high yiled after cleaning.

SAFE & NOT SMELLY

Safe to handle. Does not contain any hazardous solvent or dangerous monomer.

LOW SHRINKAGE

This resin has low shrinkage and will not change shape after post-curing

COMPATIBLE WITH 365,385 and 405 nm

You can use this resin with any printer that has 365-385nm or 405nm light source

Ortho Model Resin Storage Conditions and Post Processing 

Store the PowerResins Ortho Model bottle in dark and moisture free place at room temperature (20-24 °C). Do not forget shaking the resin well before use. If your printer has heater, you can set the temperature at 32 °C. Optionally, you can heat up your resin in a microwave for 18 seconds or by submerging in hot water for 15-20 minutes.

Post Processing Steps 

- Remove the printed part from the building plate using a scraping tool.
- Be very careful not to damage the model.

4- Post Curing

- You can reach 99 MPa flexural strength within 20 minutes with general UV curing.
- With a professional curing machine like Otoflash you can reach;
69 MPa flexural strength with 5000 flashes,
71 MPa flexural strength with 10000 flashes without gas.
- After the post curing, supports should be removed from the model cautiously and then desired sandblasting and polishing can be done

Do you have a Sticking Problem on your Build platform?

Solution :

Primer Resin Strong Adhesion

PowerResins Primer, is a resin that has very strong adhesion properties and designed to use for any LCD, DLP and SLA technology printers who has adhesion issues with.