Works with any type of DLP or LED/LCD 3d printer
PowerResins ZERO has been developed specifically for direct casting of jewelry with high details. This resins has almost no shrinkage with a shrinkage ratio below 1%. It provides good casting quality while not shrinking after 3d printing.
PowerResins Zero is our newly Zero-Shrinkage resin suitable for casting gold or silver. You can use it for filigree items as well as surface items.
-
Very low shrinkage (below 1%)
- No need for post-curing
- Perfect printing properties with sharp details suitable for jewelry with micro-pave prongs, engraving, highly detailed figures or filigree
- Create lighter jewelry with perfect precision
- Good direct casting and easy burnout
This special resin can be used for any type of DLP or LED/LCD curing 3d printer. It has fast curing properties depending on the 3d printer used.
- Fast curing properties for fast printing
- Suitable for 365nm / 385nm and 405nm wavelenght 3D printers
- Very accurate printing properties also suitable for Solus 3d printer
*You may buy 250 g as a sample resin please check the weight section.
We ship everyday worldwide via DHL and it takes up to 1-3 business days to reach you!

NO SHRINKAGE
This resins has almost no shrinkage with a shrinkage ratio below 1%.

EASY TO CAST
Easy to cast with investments such as Sherafine, Polyvest, Siladent, Bego, Nanovest or others

ACCURATE
Provide accurate print with details and can be printed below 10 micron and providing 0.1 mm thickness.

SAFE & NOT SMELLY
Safe to handle. Does not contain any hazardous solvent or dangerous monomer.

LIQUID
This resin has low viscosiy. It is easy to clean and provides high yiled after cleaning.

NO NEED UV POST-CURING
No need for Post-UV curing after printing. Simply wash and use.

COMPATIBLE WITH 365,385 and 405 nm
You can use this resin with any printer that has 365-385nm or 405nm light source
Zero Resin Print Samples






Compatible 3D Printers
- Novafab Mega
- Asiga
- RapidShape
- Miicraft
- EnvisionTec
- Projet 1200
- B9 Creator
- Flashforge Hunter
- Akuretta
- 3D Plus
- OctaveLight / Orojet
- W2P
- RapidShape
- SprintRay / MoonRay
- Tiger
- Carbon3D
- NextDent / 3D Systems
- Evodent
- Microlay
- G3D
- Solus
Zero Resin Material Properties
Material Properties | Value | Standard |
---|---|---|
Tensile strength | 39.7 MPa | ASTM D638 |
Flexural strength | 56 MPa | ASTM D790-02 |
Flexural modulus | 1417 MPa | ASTM D790-02 |
Shore Hardness | 78.2 | ASTM D2240 |
Density | 1.1 g/cm3 at 23oC | ASTM D1475 |
Viscosity | 550 - 570 mPa.s at 23oC | DIN 53211-4 |
Color | Black, Opaque Green |
Do you have a Sticking Problem on your Build platform?
Solution :
Primer Resin Strong Adhesion
PowerResins Primer, is a resin that has very strong adhesion properties and designed to use for any LCD, DLP and SLA technology printers who has adhesion issues with.
Learn MorePost Process of PowerResins Zero
1- Washing
- After the printing is completed, wash the part as attached to the building plate with ethyl alcohol (>%90) or isopropyl alcohol (>%90) for 5 minutes.
- Make sure that alcohol covers the part entirely when washing.
- Use a brush to remove uncured resin if needed.
- Do not over-wash, it may cause deterioration in dimensions of the part.
2- Drying
- Use air-compressor to dry the washed part.
- Make sure that the part is dry and uncured resin is cleaned up completely.
- If still uncured resin left on the part, wash it with fresh alcohol and dry again.
3- Part Removal
- Remove the printed part from the building plate using a scraping tool.Be very careful not to damage your hand and the model.
- Store the PowerResins Zero bottle in dark and moisture free place at room temperature (20-24 °C).
Always wear gloves during the post process !
Compatible DLP 3D Printers
- Novafab Mega / Sega
- Asiga
- RapidShape
- Miicraft
- EnvisionTec
- Projet 1200
- B9 Creator
- Flashforge Hunter
- Akuretta
- 3D Plus
- OctaveLight / Orojet
- W2P
- RapidShape
- SprintRay / MoonRay
- Tiger
- Carbon3D
- NextDent / 3D Systems
- Evodent
- Microlay
- G3D
- Solus