1 5

PowerResinEu

WAX

WAX

$349.99 USD
$349.99 USD
Sale Sold out
Weight

PowerResins WAX, designed with the characterictics of traditional wax with enhanced features allowing you to cast it like wax. Ideal for products that require flawless surface smoothness, PowerResins WAX provides the ultimate in jewelry manufacturing. It elevates the quality of your creations with its unrivaled performance in achieving smooth surfaces.

 

  • Wax-like texture and properties
  • Seamless surface perfection
  • Shrinkage rate is %5
  • Find here printing parameters for DLP and LCD printers

If you're using a third-party printer without a built-in heater, we recommend preheating the resin to 37°C for optimal results.

Disclaimer: All orders shipped outside the United States are subject to import taxes, duties, and fees, which are the responsibility of the customer. Please ensure you are aware of and prepared to cover any applicable import costs when placing an international order.

View full details

Product Description

Product Features

  • Shrinkage rate is less than %5
  • Ash-free casting like a wax
  • No need post curing
  • Perfect for stone settings
  • Find here printing parameters for DLP and LCD printers

Material Properties

Material PropertiesValueStandardTensile strength10.4 MPaASTM D638Flexural strength12.2 MPaASTM D790-02Flexural modulus277.3 MPaASTM D790-02Shore Hardness55.6ASTM D2240Density1.08 g/cm3 at 23oCASTM D1475Viscosity730 - 760 mPa.s at 23oCDIN 53211-4ColorLight Blue

Post Process

1- Washing

After the printing is completed, wash the part as attached to the building plate with ethyl alcohol (>%90) or isopropyl alcohol (>%90) for 5 minutes. Make sure that alcohol covers the part entirely when washing. Do not over-wash, it may cause deterioration in dimensions of the part.

2- Drying

Use air-compressor to dry the washed part. Make sure that the part is dry and uncured resin is cleaned up completely. If still uncured resin left on the part, wash it with fresh alcohol and dry again.

3- Part Removal

Remove the printed part from the building plate using a scraping tool. Be very careful not to damage your hand and the model.

4- No need post UV curing! Enjoy your casting.

Storage Conditions

Store the PowerResins Wax bottle in dark and moisture free place at room temperature (20-24 °C).

Do not forget shaking the resin well before use.

  • SMOOTH SURFACE

    Enjoy smooth surface prints like a traditional wax.

  • EASILY SET STONES

    Easily set stones directly on printed models before casting.

  • EASY TO CAST

    Easily cast your jewelry models with Optima prestige, Omnicast, Ransom & Randolph.

  • NO NEED POST UV CURING

    After printing simply wash and get it ready to be casted.