1 6

PowerResinEu

OPAQUE

OPAQUE

$299.99 USD
$299.99 USD
Sale Sold out
Weight

PowerResins OPAQUE, for DLP and LCD 3D printers, delivers flawless printing in jewelry production. 100% ash-free formula ensures clean, residue-free casting.

 

  • Smooth surface quality
  • Shrinkage rate is %3
  • Suitable for 365nm, 385nm and 405nm wavelenght 3D printers
  • Find here printing parameters for DLP and LCD printers

If you're using a third-party printer without a built-in heater, we recommend preheating the resin to 37°C for optimal results.

Disclaimer: All orders shipped outside the United States are subject to import taxes, duties, and fees, which are the responsibility of the customer. Please ensure you are aware of and prepared to cover any applicable import costs when placing an international order.

View full details

Product Description

Product Features

  • Smooth surface quality
  • Shrinkage rate is %3
  • Suitable for 365nm, 385nm and 405nm wavelenght 3D printers
  • Find here printing parameters for DLP and LCD printers

Material Properties

Material PropertiesValueStandardTensile strength9.63 MPaASTM D638Flexural strength11.43 MPaASTM D790-02Flexural modulus258.6 MPaASTM D790-02Shore Hardness60.8ASTM D2240Density1.08 g/cm3 at 23oCASTM D1475Viscosity480 - 500 mPa.s at 23oCDIN 53211-4ColorOpaque Green

Post Process

1- Washing

After the printing is completed, wash the part as attached to the building plate with ethyl alcohol (>%90) or isopropyl alcohol (>%90) for 5 minutes. Make sure that alcohol covers the part entirely when washing. Do not over-wash, it may cause deterioration in dimensions of the part.

2- Drying

Use air-compressor to dry the washed part. Make sure that the part is dry and uncured resin is cleaned up completely. If still uncured resin left on the part, wash it with fresh alcohol and dry again.

3- Part Removal

Remove the printed part from the building plate using a scraping tool. Be very careful not to damage your hand and the model.

4- No need post UV curing! Enjoy your casting.

Storage Conditions

Store the PowerResins Opaque bottle in dark and moisture free place at room temperature (20-24 °C). Do not forget shaking the resin well before use.

  • ACCURATE

    Provides accurate printing details with a smooth surface.

  • SAFE & ODOR-FREE

    Safe to handle. Does not contain monomers.

  • EASY TO CAST

    Easily cast your jewelry models with Optima prestige, Omnicast, Ransom & Randolph.

  • NO NEED POST UV CURING

    After printing simply wash and dry and get it ready to be casted.