PowerResinEu
VINTAGE
VINTAGE
Couldn't load pickup availability
- Shrinkage rate is less than %1
- Ash-free casting like a traditional wax
- No need post curing
- Perfect for stone settings
- Find here printing parameters for DLP and LCD printers.
If you're using a third-party printer without a built-in heater, we recommend preheating the resin to 37°C for optimal results.
Disclaimer: All orders shipped outside the United States are subject to import taxes, duties, and fees, which are the responsibility of the customer. Please ensure you are aware of and prepared to cover any applicable import costs when placing an international order.
![VINTAGE](http://powerresins.com/cdn/shop/files/Vintage-hero.jpg?v=1720009634&width=1445)
![VINTAGE](http://powerresins.com/cdn/shop/files/vintage.jpg?v=1720009633&width=1445)
![VINTAGE](http://powerresins.com/cdn/shop/files/Vintage5.webp?v=1720009633&width=1445)
![VINTAGE](http://powerresins.com/cdn/shop/files/Vintage6.webp?v=1720009633&width=1445)
![VINTAGE](http://powerresins.com/cdn/shop/files/Vintage9.webp?v=1720009634&width=1445)
![VINTAGE](http://powerresins.com/cdn/shop/files/Vintage2.webp?v=1720009634&width=1445)
![VINTAGE](http://powerresins.com/cdn/shop/files/vintage-with-print-plate3.jpg?v=1720009634&width=1445)
![VINTAGE](http://powerresins.com/cdn/shop/files/Vintage-liquid.jpg?v=1720009634&width=1445)
![VINTAGE](http://powerresins.com/cdn/shop/files/Vintage500.png?v=1720009634&width=1445)
Product Description
Product Features
- Shrinkage rate is less than 1%
- Ash-free casting like a wax
- No need for post curing
- Perfect for stone settings
- Find here printing parameters for DLP and LCD printers
Material Properties
Material PropertiesValueStandardTensile strength22 MPaASTM D638Flexural strength45 MPaASTM D790-02Flexural modulus1120 MPaASTM D790-02Shore HardnessDASTM D2240Density1.1 g/cm3 at 23oCASTM D1475Viscosity600 - 650 mPa.s at 23oCDIN 53211-4ColorOpaque Green
Post Process
1- Washing
After the printing is completed, wash the part as attached to the building plate with ethyl alcohol (>%90) or isopropyl alcohol (>%90) for 5 minutes. Make sure that alcohol covers the part entirely when washing. Do not over-wash, it may cause deterioration in dimensions of the part.
2- Drying
Use air-compressor to dry the washed part. Make sure that the part is dry and uncured resin is cleaned up completely. If still uncured resin left on the part, wash it with fresh alcohol and dry again.
3- Part Removal
Remove the printed part from the building plate using a scraping tool. Be very careful not to damage your hand and the model.
4- No need post UV curing! Enjoy your casting.
Storage Conditions
Store the PowerResins Vintage bottle in dark and moisture free place at room temperature (20-24 °C).
Do not forget shaking the resin well before use.
-
SUITABLE ALL JEWELRY DESIGNS
Stone settings, surface models, thin string filigree models up to minimum wall thickness 0.25mm.
-
NO SHRINKAGE
Vintage resin has almost no shrinkage with a shrinkage rate below %1.
-
%100 ASH-FREE CASTING
Easily cast your jewelry models with Optima prestige, Omnicast, Ransom & Randolph.
-
NO NEED POST UV CURING
After printing simply wash and dry and get it ready to be casted.