Profile Settings for Miicraft 3D Printer
You can use any PowerCast DLP resins with MiiCraft 3D Printers. Miicraft is a DLP 3d printer and it is very easy to adapt the profiles for our resins.
We will provide some profiles for PowerCast Burn DLP resin, however you can adjust these parameters according to the type of print you are making or the Z layer thickness you wish to use.
Settings for 50 micron with PowerCast Burn resin
Below we share the setting that our customers are using for 50 micron with PowerCast Burn castable resin.
| Light Power Settings | Normal |
| Thickness (um) | 50 |
| Curing Time (s) | 4 |
| Speed -> Advanced Settings | |
| Gap Adj (mm) | 0 |
| Base Layers | 1 |
| Base Curing (s) | 15 |
| Buffer Layers | 6 |
If you wish to use PowerCast Wax at 50 micron Z layer, you may simply change the Curing Time (s) to a value between 2 and 2.5 seconds depending on the curing you wish to have. PowerCast Wax is a faster curing resin that PowerCast Burn and you may want to adjust the curing time according to the type of jewelry or product you wish to print.
Also, if you wish to print at 30 micron Z layer, you can simply reduce the Curing Time. You may use a curing time of 2.5 second.
You may see some printing results in the following
