Skip to product information
1 of 5




Regular price $300.00 USD
Regular price Sale price $300.00 USD
Sale Sold out

PowerResins OPAQUE is a casting resin designed to be used with DLP and LCD 3D printers to achieve perfect printing and direct casting quality in jewelry manufacturing. With its 100% ash-free composition, it ensures no residue is left behind during the casting process, crucial for maintaining cleanliness and purity in casting resin jewelry production. It has an opaque color and provides perfect surface quality in printing.

  • Smooth surface quality
  • Shrinkage rate is %3
  • Suitable for 365nm, 385nm and 405nm wavelenght 3D printers
  • Find here printing parameters for DLP and LCD printers
    View full details

    Product Description

    Product Features

    • Smooth surface quality
    • Shrinkage rate is %3
    • Suitable for 365nm, 385nm and 405nm wavelenght 3D printers
    • Find here(link to KB printing parameters) printing parameters for DLP and LCD printers

    Material Properties

    Material PropertiesValueStandard
    Tensile strength9.63 MPaASTM D638
    Flexural strength11.43 MPaASTM D790-02
    Flexural modulus258.6 MPaASTM D790-02
    Shore Hardness60.8ASTM D2240
    Density1.08 g/cm3 at 23oCASTM D1475
    Viscosity480 - 500 mPa.s at 23oCDIN 53211-4
    ColorOpaque Green

    Post Process

    1- Washing

    After the printing is completed, wash the part as attached to the building plate with ethyl alcohol (>%90) or isopropyl alcohol (>%90) for 5 minutes. Make sure that alcohol covers the part entirely when washing. Do not over-wash, it may cause deterioration in dimensions of the part.

    2- Drying

    Use air-compressor to dry the washed part. Make sure that the part is dry and uncured resin is cleaned up completely. If still uncured resin left on the part, wash it with fresh alcohol and dry again.

    3- Part Removal

    Remove the printed part from the building plate using a scraping tool. Be very careful not to damage your hand and the model.

    4- No need post UV curing! Enjoy your casting.

    Storage Conditions

    Store the PowerResins Opaque bottle in dark and moisture free place at room temperature (20-24 °C). Do not forget shaking the resin well before use.


      Provides accurate printing details with a smooth surface.


      Safe to handle. Does not contain monomers.


      Easily cast your jewelry models with Optima prestige, Omnicast, Ransom & Randolph.


      After printing simply wash and dry yet ready to be casted.