BURN - Dental Casting Resin

$300.00
  • BURN - Dental Casting Resin

BURN - Dental Casting Resin

$300.00
$300.00

Works with any type of DLP or LED/LCD 3d printer

PowerResins Burn is a special 100% ash-free castable resin that is formulated for perfect quality in dental direct casting and fast burnout.

  • 100% ash-free burnout for dental casting and fast burnout.
  • Suitable for Dental casting.
  • Perfect casting quality so need of minimum post-process after casting
  • No investment cracks or expansion
  • Compatible with dental burnout cycle and dental investments.
  • Suitable for 365nm / 385nm and 405nm wavelenght 3D printers

This special resin can be used for any type of DLP or LED curing 3d printer. It has fast curing properties depending on the 3d printer used.

  • Fast curing properties for fast printing
We ship everyday worldwide via DHL and it takes up to 1-3 business days to reach you!

100% ASH-FREE CASTABLE

Specially made for direct casting. Evaporates with heat leaving no ash.

EASY TO CAST

Easy to cast with investments such as Sherafine, Polyvest, Siladent, Bego, Nanovest or others

E-MAX PRESS

Suitable for Emax press using any investment

PERFECT METAL CASTING

Easily do metal casting without damaging the investment

NO NEED UV POST-CURING

No need for Post-UV curing after printing. Simply wash and use.

ACCURATE

Provide accurate print with details and can be printed below 10 micron and providing 0.1 mm thickness.

SAFE & NOT SMELLY

Safe to handle. Does not contain any hazardous solvent or dangerous monomer.

COMPATIBLE WITH 365,385 and 405 nm

You can use this resin with any printer that has 365-385nm or 405nm light source

Dental Applications

Metal Casting: 3 Units Bridge

Metal Casting: Lower Jaw Partial

Emax Press: Veneer

Emax Press: Crown

Metal Casting: Extra Coronal Attachment

Metal Casting: Upper Jaw Partial

Burn Resin Material Properties

Material PropertiesValueStandard
Tensile strength 14.4 MPaASTM D638
Flexural strength 20.7 MPaASTM D790-02
Flexural modulus472 MPaASTM D790-02
Shore Hardness 70.5ASTM D2240
Density1.1 g/cm3 at 23oCASTM D1475
Viscosity490 - 510 mPa.s at 23oCDIN 53211-4
ColorGreen

Post Process of PowerResins Burn

1- Washing

- After the printing is completed, wash the part as attached to the building plate with ethyl alcohol (>%90) or isopropyl alcohol (>%90) for 5 minutes.
- Make sure that alcohol covers the part entirely when washing. 
- Do not over-wash, it may cause deterioration in dimensions of the part.

2- Drying

- Use air-compressor to dry the washed part.
- Make sure that the part is dry and uncured resin is cleaned up completely.
- If still uncured resin left on the part, wash it with fresh alcohol and dry again.

3- Part Removal

- Remove the printed part from the building plate using a scraping tool.Be very careful not to damage your hand and the model.
- Store the PowerResins Burn bottle in dark and moisture free place at room temperature (20-24 °C).

Always wear gloves during the post process !

Casting and Empress Recommendations

In dental restorations, accuracy of the 3d printed restorations as well as the casting quality of the resin have crucial importance in order to reach an optimum restoration ...

CONTINUE READING

Perfect Casting Quality

Do you have a Sticking Problem on your Build platform?

Solution :

Primer Resin Strong Adhesion

PowerResins Primer, is a resin that has very strong adhesion properties and designed to use for any LCD, DLP and SLA technology printers who has adhesion issues with.

Learn More

Compatible 3D Printers

DLP 3D Printers

LCD 3D Printers

  • Novafab Mega / Sega
  • Asiga
  • RapidShape
  • Miicraft
  • EnvisionTec
  • Projet 1200
  • B9 Creator
  • Flashforge Hunter
  • Akuretta
  • 3D Plus
  • OctaveLight / Orojet
  • W2P
  • RapidShape
  • SprintRay / MoonRay
  • Tiger
  • Carbon3D
  • NextDent / 3D Systems
  • Evodent
  • Microlay
  • G3D
  • AnyCubic
  • Wanhao
  • RapidShape
  • Uniz Slash
  • Phrozen
  • Zortrax Inkspire
  • MakeX
  • Structo3D DentaForm
  • Elegoo Mars
  • Prusa SL1
  • Kudo Bean
  • Ackuretta Freeshape

Compatible 3D Printers

DLP 3D Printers

  • Novafab Mega
  • Asiga
  • RapidShape
  • Miicraft
  • EnvisionTec
  • Projet 1200
  • B9 Creator
  • Flashforge Hunter
  • Akuretta
  • 3D Plus
  • OctaveLight / Orojet
  • W2P
  • RapidShape
  • SprintRay / MoonRay
  • Tiger
  • Carbon3D
  • NextDent / 3D Systems
  • Evodent
  • Microlay
  • G3D

LCD 3D Printers

  • AnyCubic
  • Wanhao
  • RapidShape
  • Novafab Vega
  • Uniz Slash
  • Phrozen
  • Zortrax Inkspire
  • MakeX
  • Structo3D DentaForm
  • Elegoo Mars
  • Prusa SL1
  • Kudo Bean
  • Ackuretta Freeshape