Works with any type of DLP or LED/LCD 3d printer
PowerResins Burn is a special 100% ash-free castable resin that is formulated for perfect quality in dental direct casting and fast burnout.
- 100% ash-free burnout for dental casting and fast burnout.
- Suitable for Dental casting.
- Perfect casting quality so need of minimum post-process after casting
- No investment cracks or expansion
- Compatible with dental burnout cycle and dental investments.
- Suitable for 365nm / 385nm and 405nm wavelenght 3D printers
This special resin can be used for any type of DLP or LED curing 3d printer. It has fast curing properties depending on the 3d printer used.
- Fast curing properties for fast printing
100% ASH-FREE CASTABLE
Specially made for direct casting. Evaporates with heat leaving no ash.
EASY TO CAST
Easy to cast with investments such as Sherafine, Polyvest, Siladent, Bego, Nanovest or others
E-MAX PRESS
Suitable for Emax press using any investment
PERFECT METAL CASTING
Easily do metal casting without damaging the investment
NO NEED UV POST-CURING
No need for Post-UV curing after printing. Simply wash and use.
ACCURATE
Provide accurate print with details and can be printed below 10 micron and providing 0.1 mm thickness.
SAFE & NOT SMELLY
Safe to handle. Does not contain any hazardous solvent or dangerous monomer.
COMPATIBLE WITH 365,385 and 405 nm
You can use this resin with any printer that has 365-385nm or 405nm light source
Dental Applications
Metal Casting: 3 Units Bridge
Metal Casting: Lower Jaw Partial
Emax Press: Veneer
Emax Press: Crown
Metal Casting: Extra Coronal Attachment
Metal Casting: Upper Jaw Partial
Burn Resin Material Properties
| Material Properties | Value | Standard |
|---|---|---|
| Tensile strength | 14.4 MPa | ASTM D638 |
| Flexural strength | 20.7 MPa | ASTM D790-02 |
| Flexural modulus | 472 MPa | ASTM D790-02 |
| Shore Hardness | 70.5 | ASTM D2240 |
| Density | 1.1 g/cm3 at 23oC | ASTM D1475 |
| Viscosity | 490 - 510 mPa.s at 23oC | DIN 53211-4 |
| Color | Green |
Post Process of PowerResins Burn
1- Washing
- After the printing is completed, wash the part as attached to the building plate with ethyl alcohol (>%90) or isopropyl alcohol (>%90) for 5 minutes.
- Make sure that alcohol covers the part entirely when washing.
- Do not over-wash, it may cause deterioration in dimensions of the part.
2- Drying
- Use air-compressor to dry the washed part.
- Make sure that the part is dry and uncured resin is cleaned up completely.
- If still uncured resin left on the part, wash it with fresh alcohol and dry again.
3- Part Removal
- Remove the printed part from the building plate using a scraping tool.Be very careful not to damage your hand and the model.
- Store the PowerResins Burn bottle in dark and moisture free place at room temperature (20-24 °C).
Always wear gloves during the post process !
Casting and Empress Recommendations
In dental restorations, accuracy of the 3d printed restorations as well as the casting quality of the resin have crucial importance in order to reach an optimum restoration ...
CONTINUE READING
Perfect Casting Quality
Do you have a Sticking Problem on your Build platform?
Solution :
Primer Resin Strong Adhesion
PowerResins Primer, is a resin that has very strong adhesion properties and designed to use for any LCD, DLP and SLA technology printers who has adhesion issues with.
Learn MoreCompatible 3D Printers
DLP 3D Printers
LCD 3D Printers
- Novafab Mega / Sega
- Asiga
- RapidShape
- Miicraft
- EnvisionTec
- Projet 1200
- B9 Creator
- Flashforge Hunter
- Akuretta
- 3D Plus
- OctaveLight / Orojet
- W2P
- RapidShape
- SprintRay / MoonRay
- Tiger
- Carbon3D
- NextDent / 3D Systems
- Evodent
- Microlay
- G3D
- AnyCubic
- Wanhao
- RapidShape
- Uniz Slash
- Phrozen
- Zortrax Inkspire
- MakeX
- Structo3D DentaForm
- Elegoo Mars
- Prusa SL1
- Kudo Bean
- Ackuretta Freeshape
Compatible 3D Printers
DLP 3D Printers
- Novafab Mega
- Asiga
- RapidShape
- Miicraft
- EnvisionTec
- Projet 1200
- B9 Creator
- Flashforge Hunter
- Akuretta
- 3D Plus
- OctaveLight / Orojet
- W2P
- RapidShape
- SprintRay / MoonRay
- Tiger
- Carbon3D
- NextDent / 3D Systems
- Evodent
- Microlay
- G3D
LCD 3D Printers
- AnyCubic
- Wanhao
- RapidShape
- Novafab Vega
- Uniz Slash
- Phrozen
- Zortrax Inkspire
- MakeX
- Structo3D DentaForm
- Elegoo Mars
- Prusa SL1
- Kudo Bean
- Ackuretta Freeshape