1 1

PowerResinEu

JEWELRY RESIN STARTER KIT

JEWELRY RESIN STARTER KIT

$309.00 USD
$359.00 USD $309.00 USD
Sale Sold out
Shipping calculated at checkout.

Not sure which resin to start with? Try them all with the PowerResins Starter Kit — the perfect introduction for jewelers new to our materials.

 

The kit includes 250g bottles of each of our top-performing jewelry resins:

  • Vintage – All-purpose with less than 1% shrinkage, flexible, and a global best-seller
  • Wax – High wax content for ultra-smooth surfaces and fine filigree
  • Dark – Exceptional detail, ideal for stone setting
  • Opaque – Perfect for fine jewelry, especially dainty and delicate pieces

 

Also included: PowerResins Primer — our specialized adhesion resin that boosts print success by improving plate adhesion. Compatible with LCD, DLP, and SLA printers.

 

Need help? Our team is here to support you every step of the way — from printer settings to burnout cycles.

 

If you're using a third-party printer without a built-in heater, we recommend preheating the resin to 37°C for optimal results.

 

Disclaimer: All orders shipped outside the United States are subject to import taxes, duties, and fees, which are the responsibility of the customer. Please ensure you are aware of and prepared to cover any applicable import costs when placing an international order.

View full details

Product Description

Product Features

  • Smooth surface quality
  • Shrinkage rate is %3
  • Suitable for 365nm, 385nm and 405nm wavelenght 3D printers
  • Find here printing parameters for DLP and LCD printers

Material Properties

Material PropertiesValueStandardTensile strength10 MPaASTM D638Flexural strength12.8 MPaASTM D790-02Flexural modulus281.3 MPaASTM D790-02Density1.07 g/cm3 at 23oCASTM D1475Viscosity550 - 580 mPa.s at 23oCDIN 53211-4ColorBlack

Post Process

1- Washing

After the printing is completed, wash the part as attached to the building plate with ethyl alcohol (>%90) or isopropyl alcohol (>%90) for 5 minutes. Make sure that alcohol covers the part entirely when washing. Do not over-wash, it may cause deterioration in dimensions of the part.

2- Drying

Use air-compressor to dry the washed part. Make sure that the part is dry and uncured resin is cleaned up completely. If still uncured resin left on the part, wash it with fresh alcohol and dry again.

3- Part Removal

Remove the printed part from the building plate using a scraping tool. Be very careful not to damage your hand and the model.

4- No need post UV curing! Enjoy your casting.

Storage Conditions

Store the PowerResins Burn bottle in dark and moisture free place at room temperature (20-24 °C).

Do not forget shaking the resin well before use.

  • SHARP DETAILS

    Perfect printing quality with sharp details.

  • EASY TO SET STONES

    Easily set stones directly on printed model before casting.

  • EASY TO CAST

    Easily cast your jewelry models with Optima prestige, Omnicast, Ransom & Randolph.

  • NO NEED POST UV CURING

    After printing simply wash and dry yet ready to be casted.