1 2

PowerResinsUS

DENTURE BASE

DENTURE BASE

$399.00 USD
$399.00 USD
Sale Sold out
Shipping calculated at checkout.
Size

 

Produce your removable dentures now better, faster and easier! 
PowerResins Denture is a material developed for printing denture bases. 

  • Design, print and finish perfect removal dentures
  • Perfect fit and suitable with artificial teeth
  • Exceptional mechanical properties
  • Color stability, odorless and tasteless
  • CE-Approved
  • Suitable for 365nm / 385nm and 405nm wavelength 3D printers

Disclaimer: All orders shipped outside the United States are subject to import taxes, duties, and fees, which are the responsibility of the customer. Please ensure you are aware of and prepared to cover any applicable import costs when placing an international order.

You can download the full IFU by clicking here

View full details

Product Description

Product Features

  • Biocompatible dental resin (Class I, CE), designed for denture bases in pink gum tone. 
  • Works with LCD/DLP 3D printers (405 nm). 
  • Supplied in light-tight, sealed bottles; optimized finishing workflows available. 
  • High final mechanical performance when post-cured per recommendations.  

Material Properties

  • Color: Opaque Pink 
  • Viscosity: 2,000–3,000 mPa·s (23 °C) 
  • Density: 1.1 g/cm³ (23 °C) 
  • Wavelength: 405 nm 
  • Flexural Strength: > 130 MPa (after proper post-cure) 
  • Flexural Modulus: > 5,000 MPa (after proper post-cure) 
  • Shore Hardness (D): > 93 (after proper post-cure)  

Post Process

1- Washing  After printing, remove the build platform and separate the model. Cut supports. Wipe/brush the part with 96% ethyl alcohol until all uncured resin is removed. Ensure the alcohol covers the entire surface. Do not over-wash. 

2- Drying  Use compressed air to dry completely. Make sure no alcohol or uncured resin remains on the surface before curing. 

3- Part Removal / Finishing  Carefully remove remaining supports using appropriate tools. Avoid damaging margins and surface detail. 

4- Post Curing  

Option A — Oto-Flash G-171  

  1. Place the part into the Oto-Flash G-171 chamber. 
  2. Cure with 2 × 2500 flashes under nitrogen atmosphere. 
  3. The product is ready to use. 

Option B — Medifive TwinCure 

  1. Set TwinCure to Level 3 for 30 minutes. 
  2. After curing is complete, the product is ready to use. 

Note: Curing outside the recommended settings may reduce mechanical performance and biocompatibility.  Wear nitrile gloves and eye protection during finishing. 

Storage Conditions

  • Store tightly closed between 5–25 °C in a dry, well-ventilated place. 
  • Keep away from direct sunlight, sparks, and open flames. 
  • Observe the shelf-life date (up to 2 years from production).