You can print any of our DLP PowerResins with any Asiga 3D Printers. There are actually 2 ways to print with Asiga 3D Printers. The first one is to set and change parameters such as light intensity or exposure time manually. However there is also a better way to setup parameters using ini files.

.ini files are files specially developped for Asiga 3d printers that determine all settings for the resin printing. In this article, we are providing the .ini files for PowerCast Burn and PowerCast Wax resins.

You can use any PowerCast DLP resins with B9 Creator 3D Printers. B9 Creator is a DLP 3d printer and it is very easy to adapt the profiles for our resins.

We provide here the profile used by some of our customers for PowerCast Burn DLP resin, however you can adjust these parameters according to the type of print you are making or the Z layer thickness you wish to use.

You can use any PowerCast DLP resins with Anycubic Photon 3D Printers. Anycubic Photon is a UV LCD 3D printer and it is very easy to adapt the profiles for our resins.

We provide the Anycubic settings for PowerCast Burn DLP resin, however you can adjust these parameters for our other resins such as the PowerCast Wax DLP resin according to the type of print you are making or the Z layer thickness you wish to use

Here we recommend a certain burnout cycle that is used by a large casting house, however please note that most of our customers uses different burnout and casting process. 

Casting quality depends on many factors such as investment powder used, cylinder size, oven efficiency, casting machine but also on the washing process used after printing.

You can use any PowerCast DLP resins with MiiCraft 3D Printers. Miicraft is a DLP 3D printer and it is very easy to adapt the profiles for our resins.

We provide the MiiCraft settings for PowerCast Burn DLP resin, however you can adjust these parameters according to the type of print you are making or the Z layer thickness you wish to use.